EMERGENCY EYE-WASH AND DRENCH SHOWER ENWARE EC270

Enware’ s combination showers are independently tested to comply with ANSI Z 358.1-2004. The 304 Grade stainless steel construction provides superior durability and reliability. Safety Shower Features   Stainless steel pipe work   Stainless steel stay open ball valve   Stainless steel 200mm ( 8” ) shower head   Stainless steel impeller with drenching spray pattern   Stainless steel pull rod activated shower Eye/ Face Wash Features   2 double aerated outlets with dust covers   Stainless steel bowl   Stainless steel stay open ball valve   Stainless steel hand actuator   Stainless steel foot rod & pedal actuator   Integral volume control Available options:   Audio visual alarms for alerts   Flow switch to activate alarms & lights   Proximity switches an alternative to fl ow switches   Thermal relief valve removes built-up hot water in pipes   Insulation of Pipework to moderate water temperature build up   Anti-freeze valve for cold weather applications prevents water freeze   Heat tracing cold weather applications   Pressure relief valve   NPT Flange connectors   Custom manufacturing & design   316 Grade stainless steel available   Signage as required by ANSI standard Inlet Connection 25 mm ( 1” ) BSP Minimum Water Supply Line Size DN25 mm ( 1” ) Nominal Size Minimum Requirements to achieve ANSI Z358.1-2004 compliance Min Working Pressure: 210 kPa Caution should be taken when pressure exceeds 550 kPa ( 80 psi) Min Flow Requirements: 98.7 lpm ( 26.1 US gpm) Minimum performance values for for low pressure installations* or applications not requiring ANSI Z358.1-2004 Min Working Pressure with 15mm ( ½ ” ) Eye Wash Outlets: 180 kPa ( 25.7 psi) [ Safety showers are fl ow volume dependent and the line size needs to be hydraulically calculated.] For low pressure applications request 10mm ( ” ) outlets or consider combination shower with eye wash only. Minimum Working Pressure with 10mm ( ” ) Eye Wash Outlets: 80 kPa ( 11.4 psi) Waste Water Outlet Size DN 40 mm ( 1 ½ ” ) OD Mounting Base Plate Size 150 x150 mm ( 5 yD € ” x 5 yD € ” ) with 4 Bolt Holes 11mm ( wD † ” ) Shipping Weight: 16 kg ( 35 lbs) Dimensions: 117 x 40 x 35mm Informasi lebih lanjut bisa menghubungi : Contact Person : Yoga.s Hp : 085880111657 Email : yogakarya1@ yahoo.co.id YM : yogakarya2 Website : www.karyanusatama.com